Led Indication; Ⅴ Configuration And Using; Pc Setup Software; Get Started With This Software - JoinTech JT600 User Manual

4.5 LED Indication

Please refer to the LED status under different working mode:
ID Type
1 GSM LED
2 GPS LED
3 Power LED
4 Flashlight LED
5 Charging LED
Solar panel
6
working LED
Ⅴ Configuration and Using

5.1 PC Setup software

Notice: Before you configure JT600,Please read the

5.1.1 Get started with this software

Color
When there is GSM signal, the LED will flash every 5 seconds; when
green
there is no GSM signal, the led will flash every 1 second.
When the GPS signal is valid, the LED will flash every 10 seconds,
blue When the GPS signal is invalid, the LED flash every 3 seconds;the
LED won‟t flash when the module was broken.
yellow When the battery is low, the LED will flash every 3 seconds
Flashlight, LED can be on constantly(maximum 60s/time) or flash in
white
SOS mode
When the battery is charging, the LED would be red, when the charge
red/green
finished successfully, the LED would be green
When the Solar panel is working, the LED would be red, when the
red
charge finished successfully, the LED would be green
Indication
(Table 3)
manual.《JT600 Mini-USB Cable Driver InstallationV1.2.pdf》
- 10 -