Replacing The Battery - Brother BCL-D10 User Manual

Digital cordless handset
Hide thumbs Also See for BCL-D10:
Table of Contents

Advertisement

Replacing the battery

If your battery performance is getting worse,
make sure that you have charged the battery
correctly. If the battery performance is still
poor, it is time to replace it.
CAUTION
DO NOT take off the white plastic that
covers the battery.
After installation, charge the battery for 12
hours. (See Charging the
battery on page 21.)
a
Press the area indicated (1) on the
battery cover (2) and slide it off the
cordless handset.
1
b
Remove the old battery and pull out the
connector.
c
Insert the connector (1) of the new
battery (2) in the direction shown below.
2
Troubleshooting and Routine Maintenance
d
Place the battery in the correct position.
4
e
Slide the battery cover back on.
Note
2
• Be careful that you do not catch the
battery connector cord.
• After replacement, you should set the date
and time. (See Date and
Time on page 18.)
ATTENTION:
The product you have purchased is
1
powered by Nickel Metal Hydride battery
which is recyclable. At the end of their
useful lives, under various state and local
laws, it is illegal to dispose of this battery
into your municipal waste stream. Please
call 1-800-8-BATTERY for information on
how to recycle this battery.
CAUTION
R B R C
TM
N i - M H
4
22

Advertisement

Table of Contents
loading

Table of Contents