Table of Contents
Advertisement
Optional Cordless
Handset
Your brother machine can support 3
additional cordless handsets for a total of 4
cordless handsets. If you have purchased an
optional cordless handset please follow the
steps below to setup and register your
optional cordless handset with the machine
(base unit). For the cordless handset that was
included with your machine please follow the
setup steps in the Quick Setup Guide.
Connecting the power cord to
the cradle
a
Plug the connector into the jack (1) and
route the cable through the hook (2) as
shown below.
b
Plug the cradle into the AC power outlet.
Installing the battery
CAUTION
After installation, charge the battery for 12
hours. (See Charging the
battery on page 21.)
a
Insert the connector (1) of the new
battery (2) in the direction shown below.
1
b
Place the battery in the correct position
as shown below.
1
c
Slide the battery cover back on.
1
Note
• Be careful that you do not catch the
battery connector cord.
• After replacement, you should set the date
and time. (See Date and
Time on page 18.)
General Information
2
1
2
1
Advertisement
Table of Contents
