Advertisement
Pairing the Adapter and the Doorbell
1. Press and hold the Setting button on the doorbell for
three seconds.
2. Press the button on the back of the adapter.
3. Within 12 seconds of pressing the button on the adapter, press the
Music button to select the ring for the doorbell.
4. Within 12 seconds of pressing the button on the adapter, press
the Sunlight button to select a halo light color (if available ) for that
doorbell.
5. When the wiring is complete, snap the wireless adapter onto the wall
plate.
Maintenance
Your adapter requires no maintenance except to periodically change the
battery. If using the correct battery, its life should be approximately:
• Up to 2 years; replace with CR2032 lithium battery
Low Battery Notification
When the adapter battery is low an LED on the front of the adapter gives 3
short flashes until batteries are replaced.
Specifications
Operating Temperature
RF Frequency US/Canada
Range (open field)
Sound Level (typical)
RF Power
Battery Type
Battery Life (5 activations/day)
33-00195EFS_A.HALF-SHEET.indd 7
Doorbell Push
14°F to 104°F (-10ºC to 40ºC)
916.8 MHz
350 ft. (106 m)
-
<1mW
CR2032
Up to 2 years
7
4/20/2016 4:40:43 PM
Advertisement
