Ipv6 Firewall - Spectrum 802.11ac Wave 2 User Manual

2.4.3.3 IPv6 Firewall

2.4.3.3.1 Common
Steps to set up common IPv6 Firewall:
1. From the navigation panel, go to Advanced > Security >IPv6 Firewall > Common.
2. Enable Firewall:
3. Respond to Ping Request from WAN: This feature lets WiFi Router make a response
4. Enable MLD:
5. Click Apply.
Enable or disable the IPv6 firewall. When disabled,
all IPv6 packages can input WiFi Router, output
WiFi Router and forward without any limitation.
to ping request from WAN.
Check [Yes] to allow MLD packages to be
transferred to the WiFi Router.
Check [No] to deny MLD packages.
89