Spectrum 802.11ac Wave 2 User Manual page 25

Steps to set parental control function:
1. From the navigation panel, go to Basic > Parental Control.
2. Enable Parental Control:
3. Client Name:
4. Client MAC:
NOTE: Client Name just makes it easier for administrator to distinguish LAN-side devices. The
Client MAC in fact specify the device with the Client Name.
5. Add/Delete:
6. Time Management:
7. URL Filter List:
8. Add/Delete:
9. Keyword Filter List:
10. Add/Delete:
11. Service Filter List:
12. Add/Delete:
13. Click Apply.
Select On to enable parental control, Select Off to disable
parental control.
Select client from the list. The name in the list stands for the client
that is communicating with the WiFi Router.
MAC address of the selected client.
Click or to add/delete the profile.
Click , then setup the client's schedule timetable to allow or
deny client's access to Internet.
WiFi Router prevents LAN-side device from accessing the URL
in list. It will filter all Internet WEB URLs which contains the
URLs defined by user. For example, the filter "abc" can filter both
"www.abc.com" and "www.abcd.com"
Click or to add/delete the profile.
WiFi Router prevents LAN-side device from accessing to
webpages contain the keyword in list. It will filter all Internet WEB
URLs which contains the keywords defined by user. For example,
the filter "abc" can filter both "www.abc.com" and "www. abcd.
com"
Click or to add/delete the profile.
WiFi Router prevents LAN-side device from communicating with
remote device with user defined Port Range and Protocol. The
Port Range can be a single port like "xxxx", or a port range like
"xxxx:xxxx".
Click or to add/delete the profile.
24