Wake On Lan - Spectrum 802.11ac Wave 2 User Manual

2.4.6.2 Wake on LAN

Wake on LAN is a power management function. It lets network admins wake up LAN side
devices from standby or hibernation mode. This function requires motherboard support on
LAN-side devices.
Steps to set Wake on LAN:
1. From the navigation panel, go to Advanced> Tools> Wake on LAN.
2. Target:
3. Device Name: Name of device.
4. MAC Address: The format for the MAC address is six groups of two hexadecimal digits,
5. When done, click Apply.
Enter the MAC address of the device to be woken up, or select the device
name from the list.
separated by colons (:), in transmission order (e.g. 12:34:56:aa:bc:ef).
105