Assembly - ProForm PFTL54806.0 User Manual

2 1/2" Bolt (56)–4

ASSEMBLY

2 3/4" Bolt (47)–4
To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
4" Bolt (120)–2
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
In addition to the included hex keys
adjustable wrench
Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag,
check to see if it has been preattached to one of the parts to be assembled. Extra hardware may be in-
cluded. To avoid damaging plastic parts, do not use power tools for assembly.
Crossbar Screw
Base Pad
Screw (26)–6
Crossbar Star
Washer (7)–2
Handrail Star
Washer (5)–6
Upright Star
Washer (9)–6
1. Make sure that the power cord is unplugged.
Have a second person hold the Base (52) in the
position shown.
Attach six Base Pads (63) to the Base (52) with
six Base Pad Screws (26).
, assembly requires a phillips screwdriver
, and needlenose pliers
Console Screw/
(85)–2 Latch Screw (10)–6
Upright Washer
(14)–6
Wheel Housing
Nut (43)–4
Wheel Housing
Washer (32)–4
Star Washer (81)–4
.
Ground Screw
(84)–1
Nut (16)–4
Colored Patch Frame Bolt (1)–2
1
26
63
6
Washer (29)–4
Belly Pan Screw
Handrail Bolt
(20)–2
Wheel Housing Bolt (13)–4
Upright Bolt (2)–4
26
63
52
26
63
26
63
Wheel Housing Bolt (13)–4
Handrail Washer (11)–
, an
(8)–6
26
63