Advertisement
Connecting Head Cables (Lamp Power)
Once the luminaire has been mounted, the Head Cable should be connected to the
Lamp Power Out connector on the Power Supply.
+
In a unified configuration, the Head Cable should be plugged straight into the
Power Supply.
+
In a split configuration, a 4-Pin XLR Extension Cable may be required.
Single Head
Power Supply
Figure 5: Connecting Head Cable to Power Supply - Single Head
AC Power Cord
Figure 6: Connecting Head Cables to Power Supply - Triple Head
Luminaire
Triple Head
Power Supply
6
AC Power Cord
Head Cable
Head Cable (3)
Luminaire (3)
Advertisement
