Appendix
1. Log File
Each calibration software is executed. The following log files are created automatically.
2. Error message
The main error messages are the followings.
Software
SquE.exe
MAfb1641.exe
OPM1641
Error Message
NG : Out of Range
Afbit Range Error
AF Undulation Error
Distance Error
Out of Range xxx
AF is not completed
7-22
Solution
Setting up a sensor again.
Set up a distance correctly,
and "measure" again.
Set up a distance correctly,
and "measure" again.
Set up a distance correctly, and "test" again.
Focus again.
Execute "calibration" after executing "AF".
Chapter 7