Toshiba TDP-TW95E Service Manual page 28

How to update the firmware for Network unit
Step 1)
Prepare a USB memory.
Step 2)
Extract an update file, and copy all files in the folder to root directory on your USB memory.
e.g.) Files which are unzipped are the following:
- tw100.tab
Step 3)
Turn the projector off with main power, and insert the USB memory into the USB slot.
Step 4 )
Turn Main power on while you are pressing the MENU and
RETURN button of the projector.
Projector will change the mode to "writing" and LAMP/TEMP/FAM
LEDs become orange color and TEMP LED blinks.
"Writing" will take about 7 minutes. If it is completed, the state of
projector will become standby mode.
If all LEDs become "RED", it means "Writing" was failed. You need to
try again from the beginning.
Step 5)
Turn the projector off and take USB memory out.
Step 6)
Make sure of the F/W version. You can find it on the OSD
menu of Wireless/USB input.
(Press MENU button twice, and see version in the status
display of Setting display (2) menu.)
Caution ! Do not unplug while writing !
- tw100.bin
Image – Status display(OSD)
4-6
Chapter 4
Image – BUTTON/LED