Toshiba TDP-TW95E Service Manual page 43

START 1
When starting Wireless Utility, the message "Valid Network adapter
not found. Restart..." is displayed.
Is a desired device icon shown in the "Network Connections"
Is the power supplied to the wireless LAN adapter?
Is a desired device icon valid in the "Network Connections"
Can the "Wireless Networks" tab be chosen in "Network
Terminate the other configuration utilities which are working
（Hint）
*1 Although Easy Connect is a function only for wireless LAN, Wireless Utility that sends image does not recognize which the network device is wired
or wireless.
Therefore, if there are one or more network device regardless of wired and wireless, this message will not be displayed.
*2 It can be referred to from "Start > Control Panel > Network Connections" or "Start > Settings > Control Panel > Network and Dial-up Connections".
*3 If a invalid device is changed effectively during executing Wireless Utility(WLU), the reboot of WLU is required.
*4 Intel PROSet, IBM Access Connections, etc.
Valid Network adapter not found. Restart after Network adapter is validated.
* １
*2
window of PC?
Yes
Yes
window of PC.
Yes
Connections > Properties"?
Yes
(including resident).
No
Check whether the device is registered into the device
manager, and re-wear the device and re-install the driver.
No
No
Change the invalid device effectively.
No
Terminate Wireless Utility and the
6-11
Chapter 6
Switch on wireless LAN.
(Wireless LAN adapter built-in PC)
* ４
other configuration utilities.
* ３