Start To Use - TecJet S Series User Manual

3.1 Start to Use
（1）Press the power button like the image below.
（2）Close the printer by press the power button to "O" situation.
3.2 How to Calibrate
1) How to set the IP of your computer(Here run at Windows10 Enterprise 64-bit
System)
Please check the cable and machine make sure the machine is power on and
network cable connected with the machine and computer successfully.
Step one:Find Wifi Icon at the right down corner of the desktop and press it.
Step two:Find"Network Settings" and press it.
3. About Printing Operation
开关
11 / 24