Distance Between Printhead And M Edia - TecJet S Series User Manual

2.8 Distance between Printhead and Media
Printhead base can be adjusted according to Media thickness. The best distance
between printhead and media is 1.5mm, not more than 2mm. Media should be
smooth. Adjust the M4X8 bolts as image shows, the distance will be changed
accordingly.(Example at DX5 Head)
2.9 Ink Installation
1) Keep ink out of the reach of Children. If it enters your eyes or splash on your
clothes, please flush with plenty of water.
2) Clean ink tube with our clean flush.
3) The temperature of ink should be better kept between 1 8℃—28℃.
4) After open the inks, it should not be kept for a long time. Please use it ASAP.
5) Don't shake the ink bottles. Don't pollute environment by throwing ink, ink
bottle at your will.
6) Add ink as image below shows. Connect ink tube as the image shows.
M4X8 Bolt
7 / 24