Adjusting The Pole Extension - Yardworks 054-5752-2 Instruction Manual

model no. 054-5752-2 | contact us: 1.866.523.5218

ADJUSTING THE POLE EXTENSION

• disconnect the pole saw from the power supply.
• Align top and bottom sections.
• Using a screwdriver, press on the locking tab.
• Slide the top section over the bottom one.
• When the desired length is achieved, rotate the collar counter-clockwise to secure.
①
!
NOTE: Extend the pole only to the length required to
reach the limb being cut. Do not extend the handle above
waist height.
!
NOTE: Adjust your hand placement on the shaft of the
pole saw to keep proper balance. Do not attempt to
use the pole saw at a length that does not allow you to
achieve proper footing and balance at all times.
③
②
COLLAR
④
Fig. 11
Fig. 10
19