Mounting - Nordic ID SAMPO S2 User Manual

1.7. MOUNTING

Nordic ID Sampo S2 and Nordic ID Sampo S2 UHF RFID readers can be mounted using assembly holes
of the reader. Dimensional drawing about the assembly holes can be find from Figure 1.
Nordic ID Sampo S2 One-series UHF RFID reader can be mounted also with M5 threaded screws to any
VESA 75 and VESA 100 mounting equipment (sold separately).
Figure 1 Assembly holes of Nordic ID Sampo S2 and Nordic ID Sampo S2 One-series readers
Nordic ID Group | Salo IoT Center | Joensuunkatu 7 | FI-24100 Salo |Finland
Office +358 2 727 7700 | Fax + 358 2 727 7720 | info@nordicid.com
2018-01-19
Nordic ID Sampo S2 User Guide
Version 1.0
7 / 22