Unpacking The Access Point; Package Contents; Basic Installation Guidelines - Cisco Aironet 1240AG Series Hardware Installation Manual

Chapter 2 Installing the Access Point

Unpacking the Access Point

Follow these steps to unpack the access point:
Open the shipping container and carefully remove the contents.
Step 1
Return all packing materials to the shipping container and save it.
Step 2
Ensure that all items listed in the "Package Contents" section are included in the shipment. Check each
Step 3
item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative.

Package Contents

Each access point package contains the following items:
•
•
•
•
•
•
•

Basic Installation Guidelines

Because the access point is a radio device, it is susceptible to interference that can reduce throughput
and range. Follow these basic guidelines to ensure the best possible performance:
•
•
OL-7293-01
D r a f t 1 A - C I S C O C O N F I D E N T I A L
Cisco Aironet 1240AG Series Access Point
Cisco Aironet 1240AG Series Power Module (universal power module)–optional
Mounting hardware kit --- TBD ----
– One mounting plate
Cable security bracket
–
Two suspended ceiling T-rail clips (accomodates standard and recessed T-rails)
–
One security hasp
–
Four 6 x 32 x ¼ in. flat head Phillips machine screws
–
One 8 x 32 x 3/16 in. pan head Phillips machine screw
–
2 #8 plastic wall anchors
–
– 2 #8 x 32 x 1 in. pan head screws
Grounding Block ----- TBD -----
Quick Start Guide: Cisco Aironet 1240AG Series Access Point
Safety Warnings for Cisco Aironet 1240AG Series Access Points
Cisco product registration and Cisco documentation feedback cards
Install the access point in an area where metal structures such as shelving units, bookcases, filing
cabinets, and metal gridwork do not block the radio signals to and from the access point.
Install the access point away from microwave ovens. Microwave ovens operate on the same
frequency as the access point and can cause signal interference.
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
Unpacking the Access Point
2-3