Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hdav HD-C5S4P
Summary of Contents for Hdav HD-C5S4P
- Page 1 HDMI Extender over Single CAT HDMI Extender over Single CAT.X HDMI Extender over Single CAT.X with Bi-directional IR, RS directional IR, RS-232 Serial Serial, and Auto EDID Learning Auto EDID Learning User Manual (HD-C5S4P) rev: 120403...
- Page 2 However, like all e for international use. However, like all electronic equipments, the HD-C5S4P should be used with care. should be used with care.
-
Page 3: Introduction
INTR INTRODUCTION The HD-C5S4P HDMI extender over single cat.X with bi HDMI extender over single cat.X with bi-directional IR, RS-232, and Auto EDID 232, and Auto EDID Learning boosts up your video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m... -
Page 4: Specifications
SPECIFICATIONS Model Name HD-C5S4P Technical Role of usage Transmitter [TX] Receiver [RX] HDMI compliance HDMI Deep Color & full 3D HDCP compliance Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 Full HD (1080p)-40m (130ft) [CAT5e] / 50m (165ft) [CAT6]... -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS DESCRIPTIONS ► Transmitting unit Transmitting unit HD-C5S4P-TX Front Panel RS-232: Connect to PC serial port with a DSUB Connect to PC serial port with a DSUB-9 male-male cable here MODE: A - EDID Full-HD(1080p@60) 1080p@60) - 24bit 2D video & 7.1ch audio B - EDID Full-HD(1080p@60) HD(1080p@60) - 24bit 2D video &... - Page 6 Receiving unit Receiving unit ► HD-C5S4P-RX Front Panel RS-232: Connect to PC serial port with a DSUB Connect to PC serial port with a DSUB-9 male-male cable here Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level equalization control to the received HDMI signals.
- Page 7 RS232 device, a DB9 Male to Male cable is needed. HD-C5S4P RS232 port is only for controlling A/V devices including HDTV, projector or switches with serial control port. It will not work with other serial devices like modem or barcode scanner.
-
Page 8: Package Contents
PACKAGE CONTENTS ● 1x HD-C5S4P[TX & RX] ● 1x IR blaster ● 1x IR receiver ● 2x DC 5V 2A wall wart ● 1x User Manual CONNECTION DIAGRAM... - Page 9 IR PASS PASS-THROUGH IR Extenders IR Blaster IR Receiver IR Sockets IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the plug in the IR blaster to emit all IR command signals received from the IR receiver from the plug in the IR blaster to emit all IR command signals received from the IR receiver from the other enf to control the devices corresponding to the IR signals.
-
Page 10: Hardware Installation
HARDWARE INSTALLATION 1. Connect a HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit HD-C5S4P-TX. 2. Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit HD-C5S4P-RX. 3. Connect IR Blaster/Receiver to both TX and RX units. - Page 11 PIN DEFINITION HDMI Type A (Receptacle) HDMI Pin 1 TMDS Data2+ Pin 11 TMDS Clock Shield Pin 2 TMDS Data2 Shield Pin 12 TMDS Clock– Pin 3 TMDS Data2– Pin 13 Pin 4 TMDS Data1+ Pin 14 Reserved (N.C. on device) Pin 5 TMDS Data1 Shield Pin 15...
-
Page 12: Notice
NOTICE 1. When adjusting the signal level on the receiver unit, When adjusting the signal level on the receiver unit, please dial the rotary control switch from MIN to please dial the rotary control switch from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate MAX and stop turning the rotary switch whenever the audio/video is playing normally. -
Page 13: Warranty
SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the HD-C5S4P features and specifications is subject to change without further notice.
Need help?
Do you have a question about the HD-C5S4P and is the answer not in the manual?
Questions and answers