GE Potscrubber 1222 Use And Care Manual page 12

HOW TO C~NGE COLOR PANELS
If you are redecorating, you can change your dishwasher's front panels to
match or blend with your new colors by flipping them over. Each side of
each panel is a different color. You may also paint a panel with a color of
your own choice.
How to Change the Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
Top
\
Bottom Panel Attachment Screws
Adding 1/4" Wood Inserts
Color insert panels for both the door and the lower
match your kitchen cabinets. Get them from your
nearest cabinet or lumber dealer.
12
1. Remove the bottom panel attachment screws.
2. On models without top mounting screws, remove
the entire access assembly by rotating the bottom
out and lifting it up and over the retaining tabs.
3. On models with top mounting screws, remove
the screws.
4. Take out the top trim screws and remove the
top trim.
5. Slide the color panel(s) up and out and put the
color you want in front.
6. Replace the top trim and screws.
7. Replace the entire access assembly by reversing
the steps.
Dimensions for 1/4" wood inserts:
Door Panel: 19X" H x 23 X," W.
Lower Panel: H x 23fi~" W.
NOTE: Do not operate dishwasher while changing
panels or when lower access panel is removed.
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.