Changing The Display Language; Updating The Firmware - Melco N1 Series Software Manual

Changing the Display Language

To change the display language, follow the procedure below. After the procedure is finished, the N1 will stop any file
playback. We recommend finishing any file playback before changing the display language.
1
Press the Menu/Enter button (
2
Press the Down button (
3
Select the language using the Up/Down buttons (

Updating the Firmware

To update the N1's firmware version to the latest one, follow the procedure below.
Updating via the Network
Note: To update the firmware via the network, the N1 should be connected to the Internet. If the N1 is in direct
mode, use another Ethernet cable and connect it to the LAN port and the router.
1
Press the Menu/Enter button (
) to display the menu list at the home screen.
) and select "Language", then press the Menu/Enter button (
) to display the menu list at the home screen.
46
), then press the Menu/Enter button (
).
).