Formatting Connected Usb Devices - Melco N1 Series Software Manual

3
Press the Down button (
4
Press the Down button (
5
Select the current RAID mode and press the Menu/Enter button (
6
The message "All data will be lost. Continue?" will be displayed. Make sure that all files on the drive can be
erased before proceeding. To continue formatting, press the Down button (
the Menu/Enter button (
7
When finished, press the Menu/Enter button (

Formatting Connected USB Devices

Formats the USB device connected to the backup port or expansion port. This will format the USB device to NTFS. Be
aware that a USB device formatted to NTFS will become read-only when connected to macOS.
) and select "Drive", then press the Menu/Enter button (
) and select "Format Internal Drives", then press the Menu/Enter button (
).
).
33
).
).
) and select "OK", then press
).