Shure Z16-20 User Manual
  1. Manuals
  2. Brands
  3. Shure Manuals
  4. Microphone
  5. ULX-D Quad Z16-20
  6. User manual
Shure Z16-20 User Manual

Shure Z16-20 User Manual

Ulx-d dual and quad digital wireless microphone system
Hide thumbs Also See for Z16-20:
Table of Contents

Advertisement

Quick Links

See also: Manual
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Publications
Download PDF
English
Table of Contents
IMPORTANT SAFETY
INSTRUCTIONS
Important Product
Information
Quickstart Instructions
General Description
Hardware Interface
Transmitter IR Presets
Batteries
Setting Receiver Gain
Scan and Sync
RF
Networking ULX-D Receivers
System Reset
Firmware
Connecting to an External
Control System
http://pubs.shure.com/guide/ULXD-DQ/en-US
User Guides
ULXD-DQ (English)
›
›
ULX-D Dual and Quad
Z16-20
ULX-D
®
System
IMPORTANT SAFETY
INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Allow
sufficient distances for adequate ventilation and
install in accordance with the manufacturer's
instructions.
8. DO NOT install near any heat sources such as open
flames, radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not place any open flame sources on the product.
9. DO NOT defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
Digital Wireless Microphone
9/20/17, 8*58 AM
Page 1 of 96

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z16-20 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Shure Z16-20

Summary of Contents for Shure Z16-20

  • Page 1 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Publications User Guides ULXD-DQ (English) › › Download PDF ULX-D Dual and Quad Z16-20 English ULX-D Digital Wireless Microphone Table of Contents ® System IMPORTANT SAFETY...
  • Page 2 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM prong. The wider blade or the third prong are Managing the ULXD Receiver provided for your safety. If the provided plug does with Wireless Workbench 6 not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  • Page 3 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus.

  • Page 4: Licensing Information

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM normal waste stream WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting.
  • Page 5 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television...
  • Page 6 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM replaced. Operate only with AA batteries. Note: Use only with the included power supply or a Shure- approved equivalent. WARNING Battery packs may explode or release toxic materials.

  • Page 7: General Description

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM reproductive harm. Quickstart Instructions General Description Shure ULX-D Digital Wireless offers uncompromising 24- ™ bit audio quality and RF performance, with intelligent, encryption-enabled hardware, flexible receiver options, and advanced rechargeability options for professional sound reinforcement.
  • Page 8 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM A breakthrough in wireless audio quality, Shure digital processing enables ULX-D to deliver the purest reproduction of source material ever available in a wireless system, with a wide selection of trusted Shure microphones to choose from.
  • Page 9 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM minutes, and detailed tracking of battery health status. Generations ahead of any other available system in its class, ULX-D brings a new level of performance to professional sound reinforcement.
  • Page 10 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Front Panel Infrared Sends IR signal to the transmitter for (IR) Sync sync. Window Network Illuminates when the receiver is Icon connected with other Shure devices on the network.
  • Page 11 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM the transmitter. Indicate antenna status: Diversity Blue = normal RF signal between LEDs the receiver and transmitter Red = interference detected Off = No RF connection between...
  • Page 12 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Power Powers the unit on or off. Switch Back Panel AC Power IEC Connector, 100 - 240 V AC. Input RF Antenna For antenna A and antenna B.
  • Page 13 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM audio distribution, monitoring, and recording - see Dante Network topic. Network One per network port. Speed LED Off = 10/100 Mbps (Amber) On = 1 Gbps...
  • Page 14 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Transmitters Power LED Green = unit is powered on Red = low battery or battery error (see Troubleshooting) Amber = power switch is disabled On/Off Powers the unit on or off.
  • Page 15 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Adapter battery compartment to use a Shure SB900 battery Bodypack: remove to accommodate a Shure SB900 battery Bodypack For RF signal transmission. Antenna Integrated For RF signal transmission.
  • Page 16 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Boundary and Gooseneck Base Transmitters http://pubs.shure.com/guide/ULXD-DQ/en-US Page 16 of 96...
  • Page 17 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Power Press to power on; press and hold to Button power off. Four settings are available for the Mute/Active mute/active button: Button Toggle: Press to switch between...
  • Page 18 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Flashing *MX400R series gooseneck microphones (red LED) do not offer this setting. Low- Off = More than 30 minutes of Battery LED battery life remain On (red) = Less than 30 minutes of...
  • Page 19 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Transmitter Input Clip The following warning displays on the receiver LCD panel when the transmitter input is clipped: To correct, set MIC.OFFSET to 0 dB and if necessary, attenuate the signal source.
  • Page 20 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM act a mute switch for the audio. Using the switch, the audio can be easily turned on or muted by presenters, sports referees, or anyone who periodically needs to speak.
  • Page 21 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM save. Transmitter Menu path: UTILITY > LOCK Use the transmitter controls to select and lock any of the following transmitter functions. MENU LOCK: All menu paths are inaccessible.
  • Page 22 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Transmitter Home Screen: Press the ▼ arrows at the home menu to display one of the following screens: Menu Screens Receiver Channel Receiver Use DEVICE UTILITIES > HOME INFO Information to change the home screen display.
  • Page 23 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Settings frequency: Transmitter Type Input Pad (Bodypack only) RF Power Level Transmitter Lock Status Transmitter Mute Status Battery Shure SB900 battery: runtime is Runtime displayed in minutes remaining.
  • Page 24 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Power is locked TxMuted Displayed when the transmitter audio is set to off using the MUTE MODE feature -No Tx- No RF connection between a receiver and transmitter or...
  • Page 25 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Battery Shure SB900 battery: runtime is Runtime displayed in hours:minutes Indicator remaining AA Batteries: runtime is displayed with a 5-bar indicator Menu Indicates menu navigation buttons are...
  • Page 26 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Press the control wheel to advance to the next character Press ENTER to save changes Note: The channel name is transferred to a transmitter during a sync.
  • Page 27 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Menu, All, None RF POWER Sets the transmitter RF power level: KEEP, 10mW=Nm, 1mW=Lo, 20mW=Hi. BATT Sets the transmitter battery type to ensure accurate metering: KEEP, Alkaline, NiMH, Lithium BP OFFSET...
  • Page 28 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM transmitters: KEEP, 0 to 21 dB in 3 dB increments GN OFFSET Adjustable gain to compensate for signal level difference between transmitters: KEEP, 0 to 21 dB in 3 dB increments POWER LOCK...
  • Page 29 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM CYCLES Number of charge cycles logged by the battery TEMP Battery temperature: °C/°F DEVICE    UTILITIES FREQ  OFF (default) DIVERSITY 1 + 2 3 + 4 (quad only) 1 + 2 / 3 + 4 (quad only) AUDIO ...
  • Page 30 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM NETWORK CONFIGURATION: SWITCHED/REDUNDANT AUDIO/SPLIT SHURE CONTROL: DEVICE ID, Network Mode, Set IP and Subnet values for Ethernet network DANTE: DANTE DEVICE ID, AUDIO & CNTRL, REDUNDANT...
  • Page 31 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM PRESETs automatically configure the transmitter. Each parameter has the default value KEEP, which leaves that setting unaffected by a sync. Feature Setting BP PAD +0 dB, -12 dB...
  • Page 32 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM RESET > RESTORE Use the control wheel to select the preset name, and then press Enter. Batteries The transmitter runs on two AA batteries or the Shure SB900 rechargeable battery.
  • Page 33 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Battery Indicator RF Power Setting 10 mW 20 mW >11:00 5:45 to 5:15 to 9:35 9:35 to 5:15 to 4:00 6:00 6:00 to 4:00 to 2:00...
  • Page 34 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Shure SB900 Rechargeable Battery When using an SB900 rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes remaining. Detailed information for the SB900 is displayed in the receiver BATTERY INFO menu and the transmitter menu:...
  • Page 35 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Shure Rechargeable Batteries Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime. Always store batteries and transmitters at room...
  • Page 36 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Setting Receiver Gain The receiver gain control sets the audio signal level for the entire receiver and transmitter system. Changes to the gain settings occur in realtime allowing for adjustments during live performances.
  • Page 37 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM yellow, with only the highest peaks causing the red LED to illuminate. Tip: If a vocalist is overloading a bodypack transmitter, try lowing the receiver gain. If additional attenuation is needed, use the transmitter menu to set the INPUT PAD to -12dB.
  • Page 38 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM To correct, attenuate the signal source. If the source cannot be attenuated while using a bodypack transmitter, select INPUT PAD from the main menu to attenuate the input signal 12 dB.
  • Page 39 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM http://pubs.shure.com/guide/ULXD-DQ/en-US Page 39 of 96...
  • Page 40 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM To select an Audio Summing mode: 1. Menu: DEVICE UTILITIES > AUDIO SUMMING 2. Use the control wheel to select an option, and then press Enter. Note: When set to OFF, Audio Summing is disabled.
  • Page 41 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM XLR (mic setting) -6 dB* *This setting matches a typical wired SM58 audio signal level. Scan and Sync Use this procedure to tune a receiver and transmitter to the best open channel.

  • Page 42: Multiple System Setup

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Note: When complete, SYNC SUCCESS! appears. The transmitter and receiver are now tuned to the same frequency. Multiple System Setup A setup using networked receivers is the fastest and easiest way to distribute the best open channel to each system.
  • Page 43 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM details. Note: Networked receivers must all be within the same frequency band. Networked Receivers 1. Turn on all receivers. 2. Conduct a group scan on the first receiver to find available frequencies in each group: SCAN >...
  • Page 44 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM frequencies to each receiver channel. 4. Sync a transmitter to each receiver channel. Manual Frequency Selection To manually adjust group, channel, or frequency: 1. Press SEL to choose a receiver channel and navigate to the RADIO menu.
  • Page 45 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Interference Detection monitors the RF environment for potential sources of interference which can cause audio dropouts. When interference is identified, the RF LEDs illuminate red and the following warning displays on the receiver LCD panel.
  • Page 46 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM To set the receiver to High Density mode: DEVICE UTILITIES > ADVANCED RF > HIGH DENSITY Use the control wheel to set HIGH DENSITY to ON. When prompted, sync the transmitter and receiver to enable HIGH DENSITY mode.
  • Page 47 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM In Frequency Diversity mode, the signals from two transmitters from a common audio source are routed to the outputs of 2 receiver channels. In the event of...
  • Page 48 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Use the control wheel to choose a routing option, and then press ENTER. Note: Choose OFF to disable Frequency Diversity. Frequency Diversity and Encryption Enabling Encryption while in Frequency Diversity mode...
  • Page 49 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM manually selected frequencies to networked receivers prior to a group scan to simplify system set up. Tip: Use Wireless Workbench or Wireless Frequency Finder to select the best compatible frequencies. See www.shure.com for more information.
  • Page 50 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Encrypting Multiple Transmitters to a Single Receiver Multiple transmitters can share the same encryption key, allowing them access to a single receiver. Use this method if you have multiple instruments or wish to use a combination of handheld and bodypack transmitters.
  • Page 51 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM ENCRYPTION OFF 2. Press ENTER. 3. IR Sync the transmitter and receiver to clear the encryption key. Note: If multiple transmitters are encrypted to a single receiver, each transmitter must be IR synced to clear the encryption key.
  • Page 52 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Ethernet and safely coexists on the same network as IT and control data. Selectable Dante networking modes route port signals for flexible network set up. Network Control Software...
  • Page 53 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM An IP address must be assigned to each device in the network to ensure communication and control between components. Valid IP addresses can assigned automatically using a DHCP server or manually from a list of valid IP addresses.
  • Page 54 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM 4. Set valid IP addresses and subnet values for all devices, press ENTER to save. Dante IP Addressing IP addresses for a Dante network can assigned...
  • Page 55 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM control signal routing from the receiver ports to the Dante network. Network Mode Port Function and Application Signals Secondary Primary SWITCHED Shure Shure For single network...
  • Page 56 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM signals. Setting the Dante Networking Mode Select a Dante mode to configure network signal routing on the Primary and Secondary ports. Set all receivers on the network to the same mode.
  • Page 57 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Network Example (Dante Audio + WWB6) Computer Connect the computer running the Dante controller and WWB6 to the Primary port. DHCP Can be configured with or without a Server DHCP server.
  • Page 58 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM port. Network Example (WWB6 Only) Computer Connect the computer running WWB6 to the Primary port. DHCP Can be configured with or without a Server DHCP server.
  • Page 59 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Redundant Audio Mode Use Redundant mode to carry a backup copy of the Dante audio on the Secondary network in case the audio on the primary network is interrupted.
  • Page 60 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Note: The Secondary port only supports manual IP or automatic Link-Local configuration. The Link-Local Dante Secondary address subnet is preset to 172.31.x.x (255.255.0.0) Dante Connect Dante receivers (mixers,...
  • Page 61 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Computer Connect the computer running the (Dante Dante controller to the Secondary port. Controller) DHCP Can be configured with or without a Server DHCP server. Do not route audio (Secondary through the server.
  • Page 62 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Connections Primary network switch. (Shure Control) Dante Connect Dante receivers (mixers, Receiver recorders, amplifiers) to the Primary port. Assigning Network Device IDs for Shure Control and Dante Control...
  • Page 63 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM For consistency, convenience, and easy troubleshooting, use the same device ID for both WWB6 (Shure Control) and for the Dante network. The Dante network requires unique Dante device IDs to prevent a loss of audio signal routing.
  • Page 64 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM network discovery by Dante enabled Yamaha mixing consoles. Note: Changing the Dante ID will cause a loss of audio signal. After an ID has been changed, use the Dante controller to restore audio route subscriptions using the new ID.
  • Page 65 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM entered in the receiver. Identify Device Feature The Dante controller's Identify Device feature flashes the front panel LEDs of a selected receiver to provide identification when multiple receivers are in use.
  • Page 66 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Mixer Inputs Signal Processor Inputs Recorder Inputs Forming an Audio Route Launch the Dante Controller and click on the intersection point between components to form an audio route. The audio route is also referred to as a Subscription.
  • Page 67 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM revision installed Look for the illuminated network icon on the front panel of each device: If the icon is not illuminated, check the cable connection and the LEDs on the network jack.
  • Page 68 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Caution! Performing a reset on either the Dante network card or on the ULX-D receiver will interrupt the Dante audio. Tip: Prior to performing a factory reset, note the current Dante network mode and IP settings.
  • Page 69 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM System Reset System Reset clears the current receiver settings and restores the factory default settings. To restore factory default settings: 1. Go to DEVICE UTILITIES > SYSTEM RESET >...
  • Page 70 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM When updating receiver firmware, update transmitters to the same firmware version to ensure consistent operation. The firmware of all ULX-D devices has the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all...
  • Page 71 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM to the transmitter. IR ports must be aligned for the entire download, which can take 50 seconds or longer. Connecting to an External Control System The ULX-D receiver is compatible with external control systems such as AMX or Crestron via the Ethernet, using on the same cables used to carry Shure Control (WWB6).
  • Page 72 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Manual. 3. Press the control wheel to navigate to the first digit of the GW (gateway) setting. 4. Turn the control wheel to change a value, press the control wheel to advance to the next octet.
  • Page 73 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Displays: RF Power, Tx Type, Tx Offset, Transmitter Tx Lock Settings Frequency Use drop-down to edit value Settings Illuminates when Encryption is enabled Encryption Icon Receiver...
  • Page 74 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Summing mode Locks Lock/Unlock: Menu, Gain, Power, Scan/Sync Viewing the Receiver in WWB6 Inventory Click on the Inventory tab to view the receiver channels. Double-click on parameters to enable editing.
  • Page 75 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Locking the Audio Source in Frequency Diversity Mode WWB6 software offers an option to selectively lock the Frequency Diversity audio source to a specific transmitter. Lock the audio source to select the best audio if a problem develops with one of the channels.

  • Page 76: Troubleshooting

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM wheel on the receiver. When the control wheel is pressed, the corresponding receiver icon in WWB6 will flash to identify the location of the receiver. Troubleshooting Issue See Solution...
  • Page 77 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM receiver corresponds to the input of the mixing console, amplifier, or DSP. Cables Check that all cables and connectors are working correctly. Interface Locks The transmitter and the receiver can be locked to prevent accidental or unauthorized changes.
  • Page 78 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM transmitter, or it could be from an interfering source, such as a television broadcast. If more than one or two of the amber RF LEDs are still illuminated while the transmitter is off, then that channel has too much interference, and you should try a different channel.
  • Page 79 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM from the receiver antenna, you may be able to increase range by doing one of the following: Reduce interference (see above). Increase transmitter RF power level.
  • Page 80 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM 2008/34/EC RoHS Directive 2011/65/EU Note: Please follow your regional recycling scheme for batteries and electronic waste Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU.

  • Page 81: Specifications

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM FCC: DD4ULXD1X52, DD4ULXD2X52 IC: 616A-ULXD1V50, 616A-ULXD2V50 FCC: DD4ULXD1V50, DD4ULXD2V50 Note: For transmitters operating in the V50 and V51 bands: nominal free space antenna gain at middle of the band is typically -6 dBi, and rolls off at the band edges an additional -4 dB.

  • Page 82: Battery Type

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM 145 dB SPL (SM58), typical Note: Dependent on microphone type Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 Rechargeable Li-Ion or LR6 AA batteries 1.5 V...
  • Page 83 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Shure proprietary digital Power 1 mW, 10 mW, 20 mW See Frequency Range and Output Power table, varies by region Audio Input Connector 4-Pin male mini connector (TA4M), See drawing for details...

  • Page 84: Audio Output

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Impedance 50 Ω Occupied Bandwidth <200 kHz Modulation Type Shure proprietary digital Power 1 mW, 10 mW, 20 mW See Frequency Range and Output Power table, varies by region...

  • Page 85: Phantom Power Protection

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Phantom Power Protection ULXD4D & ULXD4Q Dimensions 44 x 482 x 274 mmH x W x D Weight ULXD4D 3.36 kg (7.4 lbs), without antennas ULXD4Q 3.45 kg (7.6 lbs), without antennas...
  • Page 86 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM alkaline 11 hours See Battery Runtime Chart Dimensions VHF V50 and V51 278 mm x 51 mm (10.9 in. x 2.0 in.) L x Dia. Other frequency 256 mm x 51 mm (10.1 in.
  • Page 87 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Note: For connection of one additional receiver in the same band Configuration Unbalanced, passive Impedance 50 Ω Insertion Loss 0 dB RF Input Spurious Rejection >80 dB, typical...
  • Page 88 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM RF Tuning Step Size 25 kHz, varies by region Image Rejection >70 dB, typical RF Sensitivity −98 dBm at 10-5 BER Latency <2.9 ms Audio Frequency Response ULXD1 20 –...
  • Page 89 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM -18°C (0°F) to 50°C (122°F) Note: Battery characteristics may limit this range. Storage Temperature Range -29°C (-20°F) to 74°C (165°F) Note: Battery characteristics may limit this range.
  • Page 90 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Batteries ULXD Battery Life ULXD SB900A alkaline 1/10 mW 20 mW 1/10 mW 20 mW 470 to >11 hours >7 hours 11 hours 5:30 hours 902 to 10 hours >7 hours...
  • Page 91 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM 510 to 530 1/10/20 534 to 598 1/10/20 534 to 598 1/10/20 534 to 565 1/10 572 to 636 1/10/20 572 to 636 1/10/20 606 to 670...

  • Page 92: Furnished Accessories

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM 1492 to 1525 1/10/20 1785 to 1805 1/10/20 1785 to 1800 1/10/20 1790 to 1805 1/10/20 Note: Frequency bands might not be available for sale or authorized for use in all countries or regions.
  • Page 93 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Receiver ULXD4D (Dual Receiver), ULXD4Q (Quad Receiver) 1/2-Wave Antenna (2) Varies by band (see Antennas table for band-specific part numbers) Hardware Kit (1) 90XN1371 2' BNC Cable (2)
  • Page 94 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM Beta 87A RPW120 Beta 87C RPW122 KSM9 RPW184 KSM9HS RPW186 Bodypack System Bodypack Transmitter ULXD1 1/4-Wave Antenna Varies by band (see Antennas table for band-specific part...

  • Page 95: Optional Accessories

    Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM 95AA9279 95G9043 (Yellow) 95AL9279 95D9043 (Gray) 95AL9279 95D9043 (Gray) 95AK9279 95E9043 (Black) 95AJ9279 95E9043 (Black) 95AD9279 95E9043 (Black) 95AD9279 95E9043 (Black) 95AF9279 95F9043 (Blue) 95M9279 95F9043 (Blue)
  • Page 96 Shure Publications | User Guides | ULX-D Dual and Quad Z16-20 9/20/17, 8*58 AM UHF Line Amplifier UA830USTV UHF Antenna Power Distribution Amplifier UA844SWB (U.S.A.) UHF Antenna Power Distribution Amplifier UA844SE (Europe) In-line Power Supply UABIAST Front Mount Antenna Kit (Includes 2...

This manual is also suitable for:

Ulxd4qUlxd4d

Table of Contents