Table of Contents
Advertisement
Information
• If "Valid/Invalid" is set to "Invalid", you cannot display the sites
with that certificate.
Others
C ]
You can set i-mode connection timeout and the type of
message to check. You can also check the i-mode
settings.
Setting item/Setting at purchase
1. From i-mode menu (P121), "i-mode setting" ]
"Others" ] Select from the following setting items
Connection timeout
It may take time to download from some sites. You
can set the time to wait before canceling
downloading. After setting, press I[Done].
i-motion auto play
You can set whether to play back an i-motion movie
automatically when you download a standard (normal)
type of i-motion movie from a site. After setting, press
I[Done].
Check new message
You can set the contents to check by performing
"Check new message" from among i-mode mail,
MessageR or Message F. After setting, press
I [Done].
(i-mode) ] 84
> P241
Check settings
You can check the individual "i-mode setting".
Reset settings
You can reset each of the "i-mode setting" to their
defaults. To reset the settings, enter terminal security
code > C [OK].
Reset data
You can delete all data related to i-mode (Bookmark,
Screen memo, URL history) except for MessageR/F.
To reset the data, enter terminal security code > C [OK].
Information
• Even when you have set "Connection Timeout" to "Unlimited",
you may be disconnected depending on radio wave
conditions.
i-mode
131
Advertisement
Table of Contents
