Table of Contents
Advertisement
Settings
Information
• You can make a call by pressing the switch during showing a
phone number or selecting a phonebook.
• While receiving a call, you can connect it by pressing the switch.
• During talking over a call, you can end the call by pressing the
switch for 1 or more seconds.
• If you press the switch for 1 or more seconds while receiving a
call, the call will be rejected.
Setting to Reject/Accept Incoming Calls
C ]
You can set whether to reject incoming calls.
Setting item/Setting at purchase
1. From the Settings menu (P85), "Call/Answer" ]
"Reject/Accept call" ] Enter your terminal
security code ] C
• The Reject/Accept call display appears.
2. Select from the following setting items
Accept
You can set whether to accept all incoming calls.
Reject on list
You can reject the incoming call from the specific parties.
You can set the rejecting action and the party's phone
number to reject a call by pressing I [List] (See below).
90
(Settings) ] 14
> P254
Reject all calls
– Silent : You can disable the ringing tone for all
incoming calls.
– Disconnect call : You can reject all incoming calls.
Memory reject call
You can reject calls from parties not registered in
phonebook and those with no caller IDs.
Information
• Even when rejecting a call by "Reject on list", "Reject all calls",
or "Memory reject call", the record will be remained.
Setting Reject call List
1. From the Reject/Accept call display (See left),
Select "Reject on list" ] I [List]
• The Reject on list will be displayed.
Mark
The type of reject call is set to "Silent".
The type of reject call is set to "Disconnect call".
• M [Menu]: You can edit/delete the list set.
2. I[Add] ] Select from the following setting items
] After setting, I[Done]
Reject types
– Silent : Disables the ring tone when receiving the
call from the other party set to "Reject number".
Description
Advertisement
Table of Contents
