Table of Contents
Advertisement
Making calls/Receiving calls
Information
• When dialing/receiving overseas, some name of the other party
may not be displayed even that name is registered in the
phonebook.
When you didn't get a call
When you could not answer the incoming voice call/video-
phone call, the following screen indicating a missed call
appears and the LED blinks for approx. 60 seconds.
• C [Select]: You can view the list of received calls.
• I [Close]: You can close the screen for missed
calls.
Using the Submenu of the Ringing Display
1. From the Ringing screen (P51), M[Menu] ]
Select from the following submenu items
※ 1
Voice mail
The Call is connected to the Voice Mail Service
Center.
52
Call rejection
The call is disconnected without answering it.
※ 2
Call forwarding
The call is forwarded to the registered phone number.
※1: If you use voice mail menu, you should register this service
in operator. For details, see "Using voice mail" (P204).
※2: If you use call forwarding menu, you should register this
service in operator. For details, please refer to the "Using
Call Forwarding Service" (P207).
Using Public mode (drive mode)
Public mode is an auto-answer service that puts stress on
manners in public spaces. When there is an incoming call
in Public mode, a guidance to the effect that you cannot
answer the call because you are driving a car or in a place
(train, bus, theater, etc.) that requires restraint from using a
phone is played for the caller and the call is disconnected.
• Public mode can be set/cancelled only from the stand-by
display (in addition, from a screen showing "").
• You can make calls in Public mode.
• When the Caller ID request service is set to "Activate"
and the "User unset" incoming call is received, a voice
guidance requesting to send Caller ID is played.
(No public mode guidance is played.)
Advertisement
Table of Contents
