Dynacord L1300FD-AU Installation Manual page 28

L Series and C Series FIR-Drive Power
28 en | Power amplifier menu navigation
Amplifiers
Lock menu: Restricts unauthorized access by locking access to the amplifier in different
options. Using the lock feature affects changes to Front Control, Preset, AMP Setup, DSP Edit,
USB and Reset function with a 4-digit pin code. Use the encoder knob to view the menu/
function you want to lock.
Notice!
Keep your password in a safe place.
To unlock the amplifier if you've forgotten your password requires a service center activity.
Hint: If you lock the front panel control, all menus and parameters that could be accessed are
blocked. The amp can still be accessed from a computer via the USB port. Changes via GPI are not
affected by locking.
Notice!
If the amplifier is controlled via remote control software the first line in the display is showing
Remote Control and the front panel access is locked.
Options: User preferences for brightness, dim levels, contrast, delay units and ambient
temperature (for delay calculation) can be selected.
Reset: Returns the amplifier to the original factory settings. The option Erase User Presets
allows the user to keep or erase the user presets within the reset. Available options for this
selection are: No or YES.
Notice!
Performing a reset erases the user customized settings saved under the Store Preset option.
The 50 user customized settings in the Store Preset option return to <EMPTY>.
Info: Displays the name of the amplifier, the amplifier model (e.g. L3600FD), firmware version
and current ontime. C Series amplifiers have an additional parameter: Standby time.
For firmware updates, amplifier control software, and product related information visit our
website: www.dynacord.com/software.
2017.10 | 02 | F.01U.327.801 Installation manual Bosch Sicherheitssysteme GmbH