Page 1
Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com Back to the Extech 380652 Product Page Introduction Congratulations on your purchase of the Extech Mini Clamp-On DMM. This meter measures and displays Voltage, Current, and Resistance. The DCA zero adjustment permits relative and offset DC current measurements.
Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies to sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext.
Page 3
5. Do not exceed the maximum rated input voltage. 6. Always put the ‘On/Off/Hold’ switch to the OFF position when the instrument is not in use. 7. Remove the battery when the instrument is to be stored. 8. International Safety Symbols: Model 380652 Version 3.0 June 2005...
Page 4
4. Slide the 20A/200A switch to the 200A position. 5. Adjust the DCA Zero knob for a zero reading. 6. Press the trigger to open the current jaw. Clamp around the conductor under test. 7. Read DCA values on the digital display. Model 380652 Version 3.0 June 2005...
Page 5
Use only a dry cloth to clean the plastic case. Do not use solvents, abrasives, or harsh detergents. 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com Back to the Extech 380652 Product Page Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 FAX 781.665.0780 - TestEquipmentDepot.com...
Need help?
Do you have a question about the 380652 and is the answer not in the manual?
Questions and answers