Advertisement
Accessory Kits
Wellborn Cabinet, Inc., offers many accessory kits that add additional storage options to your cabinetry. Below is an
example of one of our Installation Instructions. Installation Instructions are included in every accessory kit that is ordered.
The instructions are also available for download from our web sites at wellbornandyou.com or wellborn.com.
C
ontemporary and
CL18, CL24, CL30, CL36, CL48 / TL18, TL24, TL30, TL36, TL48
1. Place the fixture panel
this in place with the four screws which have been provided.
2. Mount the wiring box to the wall and run the electrical wire through the hole on the
back panel.
3. The wires from the light fixture can now be connected to the wire from the wiring box.
4. Attach the front panel/light fixture to the light box by securing them with the two
decorative brass nuts.
Note: The unit can be either flush or recess mounted. To recess mount, a hole must be cut to
accommodate the wiring box. Cut out dimensions are as follows:
CL18 & TL18—15
CL24 & TL24—21
CL30 & TL30—27
*Bulbs not included.
Installation Instructions
KIT INCLUDES:
(1) WIRING BOX
(1) FIXTURE PANEL
(1) FACE FRAME
(2) DECORATIVE BRASS NUTS
(4) MOUNTING SCREWS
1
against the back side of the wooden frame
1
⁄
" x 4
3
⁄
"
4
4
1
⁄
" x 4
3
⁄
"
4
4
1
3
⁄
" x 4
⁄
"
4
4
t
o
raditional
verhead
CL36 & TL36—33
CL48 & TL48—45
l
ights
2
. Secure
1
⁄
" x 4
3
⁄
"
4
4
1
⁄
" x 4
3
⁄
"
4
4
31
Advertisement
