Advertisement
Door and Hinge Adjustments
If your door is out of alignment, determine the hinge type on your cabinets based on the
photographs below and use the following steps to make the necessary adjustments.
Use a #2 Phillips head and a #2 POZI tip screwdriver for all adjustments.
I.
HINGE A – C2199, C2204, C2207, C1103, C1104 AND C1105
1. Height Adjustment: Loosen fixing screw (screw #1) on all hinges of one door. Move
door to desired position. Retighten fixing screws on all hinges.
2. Side Adjustment: Loosen side adjustment screw (screw #2) on all hinges of one door.
Move door to desired position. Retighten fixing screws on all hinges. You have up to
1.5mm (1⁄16") in each direction.
3. Depth Adjustment: The cam (screw #3) moves the door in and out for depth of each
hinge, just turn to adjust.
II. HINGE B – C2208 AND C1107
Height Adjustment: Loosen fixing screw (screw #1) on all hinges of one door. Move door to
desired position. Retighten fixing screws on all hinges.
Smooth Close Hinge version available for hinges A, B and D. Contains the same
adjustments as its standard counterpart with the addition of an on/off switch.
III. HINGE C – C2210
Height Adjustment: Loosen fixing screw (screw #1) on all hinges of one door. Move
door to desired position. Retighten fixing screws on all hinges.
IV. HINGE D – C2214 AND C1106
1. Height Adjustment: Loosen fixing screw (screw #1) on all hinges of one door. Move
door to desired position. Retighten fixing screws on all hinges.
2. Side Adjustment: Turn side adjustment screw (screw #2) until door is in proper
position. You have up to 1.5mm (1⁄16") in each direction.
3. Depth Adjustment: The cam (screw #3) moves the door in and out for depth of each
hinge, just turn to adjust.
V. HINGE E – C2187, C2188 AND C2190
1. Height Adjustment: Loosen fixing screws (screw #1 or #5) on all hinges of one door.
Move door to desired position. Retighten fixing screws on all hinges.
2. Side Adjustment: Turn side adjustment screw (screw #2) until door is in proper
position. You have up to 1.5mm (1⁄16") in each direction.
3. Depth Adjustment: Loosen fixing screw (screw #3) and move door to desired position,
retighten fixing screw.
4. Door Removal: To remove hinge from mounting plates, press on clip (#4) and remove.
To attach door, slide into track and press firmly to clip into plate.
2
1
B
1
ON/OFF SWITCH
C
1
D
2
1
3
2
E
4
1
5
A
3
3
19
Advertisement
