Table of Contents
Advertisement
2. Press up to select level 2. After a short pause the display will show "Access Pass
code".
3. Press up or down to enter the pass code 9, Pass is momentarily displayed. After
a short pause the display will return to home, the controller is now in level 2.
When Level 2 operations have been completed the supervisor must return to Level 1
manually. It is not necessary to enter a code when going from a higher level to a lower level.
To Return to Level 1:
1. Press and hold page for 3 seconds. The display will show "Access Goto Level 2.
2. Press down to go to level 1. After a short pause the display will revert to home, the
controller is now in level 1.
MC19-1.22
Quick Start Guide
7
Advertisement
Table of Contents
