1
Pull the bottom part of the front panel to
remove it from the appliance.
2
Press the two clips down and pull the pre-
filter towards you.
3
Wash the pre-filter under a running tap. If
the pre-filter is very dirty, use a soft brush
to brush away the dust.
4
Air dry the pre-filter.
Note
•
Make sure that the pre-filter is completely dry.
If it is still wet, bacteria may multiply in it and
shorten the lifetime of the pre-filter.
5
Put the pre-filter back into the appliance.
Note
•
Make sure that the side with the two clips is
pointing towards you, and that all hooks of the
pre-filter are properly attached to the purifier.
6
To reattach the front panel, mount the
panel onto the top of the appliance first
(1). Then, gently push the panel against the
body of the appliance (2)
7
Touch and hold the reset button
3 seconds to reset the pre-filter cleaning
time.
for
3s
EN
15