Electrical Requirements - Viking VERT530-4B Installation Manual

Electrical Requirements

Electrical Requirements
Check your national and local codes
regarding this unit. This rangetop requires
3-wire, 240-208 VAC/60 Hz. See "Installation"
section for grounding instructions. Must be
fused seperately from any other circuit.
VERT
2" 3/4"
(5 cm)
Cutout for electrical
5" (12.7 cm)
Electrical
connection
in this area
DERT
3/4"
(1.9 cm)
minimum
Electrical
connection
in this area
10
WARNING
ELECTRICAL SHOCK
HAZARD
To avoid the risk of electrical
shock, personal injury or death;
verify electrical power is turned off at the
breaker box until the rangetop is installed
and ready to operate, installation by an
authorized installer only.
(1.9 cm)
minimum
2"
(5 cm)
Cutout for electrical
5" (12.7 cm)
General Information
READ AND FOLLOW ALL WARNING
AND CAUTION INFORMATION WHEN
INSTALLING THIS APPLIANCE.
• All openings in the wall behind the
appliance and in the floor under the
appliance must be sealed.
• DO NOT obstruct the flow of combustion
and ventilation air.
Moving, Handling, and Unpacking
Remove and discard all packing materials,
including cardboard and tape on the outside
of the rangetop.
Some stainless steel parts may have a plastic
protective wrap which must be peeled off.
All stainless steel body parts should be
washed with hot, soapy water and with a
liquid cleaner designed for this material. If
buildup occurs, DO NOT use steel wool,
abrasive cloths, cleaners, or powders.
11