Boot - MSI X99S XPOWER GAMING TITANIUM Manual

fResume By Onboard LAN [Disabled]
Enables or disables the system wake up by Onboard Intel LAN.
[Enabled]
[Disabled]
fResume by USB Device [Disabled]
Enables or disables the system wake up by USB devices.
[Enabled]
[Disabled]
fResume From S3/S4/S5 by PS/2 Mouse [Disabled]
Enables or disables the system wake up by PS/2 mouse.
[Enabled]
[Disabled]
fResume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Enables or disables the system wake up by PS/2 keyboard.
[Any Key]
[Hot Key]
[Disabled]
fHot Key [Ctrl+Space]
Selects a combination of keys as a hot key to wake the system. This item appears
when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key.
fIntel(R) Ethernet Connection I218-V-(MAC address)
Shows driver information and configures Ethernet controller parameter. Press
Enter to enter the sub-menu.

Boot

Sets the sequence of system boot devices.
Full Screen Logo Display [Enabled]
f
Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.
GO2BIOS [Disabled]
f
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec
upon bootup.
[Enabled] The system boots straight to the BIOS setup by long pressing the power
button about 4 seconds when the system is off.
[Disabled] Disables this function.
70
BIOS Setup
Enables the system to be awakened from the power saving modes
when activity or input signal of Intel LAN device is detected.
Disables this function.
Enables the system to be awakened from sleep state when activity of
USB device is detected.
Disables this function.
Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
Disables this function.
Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
Disables this function.