Jbat1: Clear Cmos (Reset Bios) Jumper - MSI X99S XPOWER GAMING TITANIUM Manual

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumper to clear the CMOS memory.
Resetting BIOS to default values
1. Power off the computer and unplug the power cord
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.
DISCH1: Discharge Button
This button allows you to discharge the motherboard by using the button instead of
removing the battery. You can discharge the motherboard by pressing this button while
the system is off.
52
Overview of Components
Keep Data
(default)
Discharge Button
Clear CMOS/
Reset BIOS