Travel Charger - Motorola iDEN i2000 User Manual

i2000 UserÕs Guide

Travel Charger

Using the NPN6197 Travel Charger, you can charge a battery from an
AC outlet. On one end of the travel charger, an accessory connector
attaches to the bottom of the phone unit. At the other (AC outlet) end of
the device, there is a compact housing that contains the plug-in power
supply. A lightweight cable connects the two ends (accessory connector
and supply).
A green LED on the accessory power supply indicates that the Travel
Charger is plugged in.
Using the Travel Charger
Accessory Connector
Figure 3. Using the Travel Charger
1. While holding the i2000 with its front toward you, insert the
accessory connector (with the Motorola logo facing you) into the
slot on the bottom of the i2000 until you hear a click.
2. Plug the Travel Charger transformer into an AC wall outlet. The
power light (green LED) on the accessory power supply will
come on.
Travel Charger Operating Specifications
Input voltage range: 90-264 VAC @ 50/60 Hz.
Operating temperature range: 0°C to +50°C
Vehicular Battery Charger
The NTN8655 Vehicular Battery Charger (VBC) provides power to the
phone unit and charges the phone's Lithium Ion battery.
The power light (green LED) will light when the VBC is receiving
power.
56
Travel Charger
Transformer