Charging And Attaching The Battery - Motorola iDEN i2000 User Manual

Charging and Attaching the Battery

Remove the battery from the protective case provided in the original
packaging. When the battery is not attached to the phone or being
charged, store it in this case.
Charging the Battery
To get the maximum use from the battery, charge it for at least three
hours before you use it for the first time.
Attach the charger connector to the i 2000, then flip open the prongs and
plug the charger into an electrical outlet. For more information about
chargers, see "Accessories" on page 55.
Attaching the Battery
To attach the battery to your i 2000,
align the battery as shown. Press down
on the battery until you hear a click.
Battery and Charging Status
A low battery is indicated by a short,
chirp-like sound through the speaker.
The battery strength icon shows the
remaining charge in the battery. Three
bars indicate full charge. When you
have less than five minutes of talk time
remaining, the indicator flashes.
Icon
Flashes
Charging Low Battery
Discharging Low Battery
Figure 1. Battery Charging Status
Detaching the Battery
To detach the battery, press the latch to release the battery and slide the
battery downward.
Getting Started
0-30% 31-60% 61-90%
0-10% 11-40% 41-70%
Latch
91-100%
71-100%
5