Changing Your Call Barring Passcode - Motorola iDEN i2000 User Manual

1. From the Phone Ready screen, press
until you see the "Bar" menu
option.
The time, date, and menu option,
"Line2", do not appear in GSM.
2. Select "Bar". The "Call Barring
Incoming" screen displays.
3. Press . The "Call Barring
Outgoing" screen displays.
4. Press again. The "Call Barring
Recall Status" screen displays.
5. Select "OK". At this point, you are
required to enter your passcode then
select "OK". Next, the "Please Wait"
message displays.
If you enter the wrong passcode, the
"Wrong Bar Passcode" message displays
then the "Enter Bar Passcode" screen
displays again. Carefully re-enter your
passcode. It must be between 4 and 8 digits.
6. After the "Please Wait" message, the "Call Bar Incoming:Off"
screen displays. Do one of the following:
• To view only the Call Bar Incoming status, select "OK".
• To view the Call Bar Outgoing status, press
select "OK".

Changing Your Call Barring Passcode

To change your call barring passcode:
1. From the Phone Ready screen, press
"Prgm" menu option.
The time, date, and menu option, ÒLine2Ó, do not appear in GSM.
2. Press , . The "48=Change Bar
Passcode" screen displays.
3. Select "OK". The "Old Code?" screen
displays.
4. Enter your current passcode then select
"OK". Thew "New Code?" screen
displays.
5. Enter your new passcode then select "OK".
Making Phone Calls
Phone Ready
(SystemName)
2:12p 09/03
Bar Line2
Call Barring
Recall
Status
Exit OK
Enter Bar
Passcode
*****
Cancl OK
, then
until you see the
48=Change
Bar Passcode
Exit OK
27