Related Manuals for ANTIFERENCE HDMI0108SCAT
Summary of Contents for ANTIFERENCE HDMI0108SCAT
-
Page 1: User Guide
HDMI0108SCAT 1 to 8 over single CAT splitter with HDMI loop & IR control User Guide... - Page 2 Introduction This Antiference HDMI device splits and extends an HDMI source to 8 points over single CAT6 cables up to 40m away. Also included is an HDMI loop through for a local set or to loop the signal into another part of the system such as an Antiference HDMI modulator.
-
Page 3: Package Contents
Package contents Transmitter unit ×1pcs Receiver unit ×8pcs User Manual ×1pcs IR blaster extension IR receiver extension DC12V/3A ×1pcs cable x1pcs cable ×8pcs Features Distribute 1 HDMI source to 8 HDMI displays over network cable HDMI Loop-out. Compatible with CAT6/6a/7 network cables. The transmission distance is up to 40m/131ft. -
Page 4: Panel Description
Installation Requirement 1. HDMI source device (SKY, Blu Ray, PS3, Apple TV, CCTV etc) 2. HDMI display device such as HDTV, or projector with HDMI port. 3. UTP/STP CAT6/6A/7 cable, follow standard IEEE-568B. Panel description 1. Transmitter unit (TX) 1. Power input (DC12V) 2. - Page 5 2. Receiver unit (RX) 1. LENGTH: automatic cable detection for adjusting to the length of the network cable 2. RJ45 signal input 3. RJ45 indicator led is lit solid when HDMI signal transmission takes place, It will flash when signal is not being transferred. 4.
-
Page 6: Installation Procedures
Installation Procedures How to make a CAT5/5E/6 network cake All connections should be terminated to the standard IEEE-568B: 1- Orange/white 2- Orange 3- Green/white 4- Blue 5- Blue/white 6- Green 7- Brown/white 8- Brown Connection HDMI Input HDMI extender splitter power Cable HDMI Out... - Page 7 Connection instruction: 1. Connect the HDMI signal source device to the HDMI input port on the main splitter unit. 2. Connect the IR blaster to EXTENDER IR OUT and position in front of the source device in the correct location to enable control. 3.
- Page 8 Q : No image or audio output on display ? 1. Please check if display is in standby mode; 2. Please check the correct HDMI input is selected on the display 3. Please check that the “LINK” LED on RX side remains on. If the LED is flashing, this means RX is not receiving signal from the main splitter unit.
-
Page 9: Declaration Of Conformity
Colour Black Declaration of Conformity We, ANTIFERENCE LIMITED herewith declare that the HDMI splitter kit complies with all essential requirements and any other applicable conditions set forth on directive 1999/05/CE. According to the WEEE (Waste Electrical and Electronic Equipment) EU Directive, do not dispose of this product as household waste or commercial waste.
Need help?
Do you have a question about the HDMI0108SCAT and is the answer not in the manual?
Questions and answers