Table of Contents
Advertisement
ECA10101
he mechanism,
rn beyond the
m settings.
(a)
ad as follows.
See page 6-6.)
ring preload and
he suspension,
ring in direction
1. Special wrench
the spring pre-
2. Position indicator
soften the sus-
Spring preload setting:
adjusting ring in
Minimum (soft):
Standard:
notch in the ad-
Maximum (hard):
osition indicator
3. Install the panel.
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
G
Do not tamper with or attempt to
INSTRUMENT AND CONTROL FUNCTIONS
2
6 7 8 9
1 2 3 4 5
(b)
1
1
4
9
3-15
open the cylinder assembly.
G
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
G
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
G
Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
EWA10221
2
3
4
5
6
7
8
9
Hide quick links:
Advertisement
Table of Contents
