Subaru Impreza 2012 Instruction Manual page 85

Read First
4
Change the unit settings if necessary. Touch
to continue. You can change this at any time from Units
and Formats. (See Page 173.)
5
Change the initial route plan settings if necessary. Touch
(Next) to continue. You can change this at any time
Next
from Route Settings. (See Page 169.)
84 Navigation
6
(Next) This completes the initial setup. Touch
Next
continue. After setting up, you can run the Setup Wizard
at any time from the Settings menu. (See Page 163.)
After the initial setup, the navigation menu is displayed and you can
start using the software.
(Finish) to
Finish