Subaru Impreza 2012 Instruction Manual page 211

Audio Operations
■
Tuning a station
Manual selection
1
Touch or .
• :
Move up 1 step.
:
Move down 1 step.
Auto tuning
1
Touch or for 1 second or more.
• The tuner moves automatically to the station closest to the
frequency currently displayed on the screen and stops. To
cancel auto tuning while it is operating, touch the button again.
NOTE
• In some cases, it is difficult to maintain the optimum reception because the
position of the antenna on the vehicle is always changing (relative to the
station antenna), and so the strength of the received wireless signal changes
continuously. Also, obstructions such as the natural topography or the pillars
of signboards may affect the reception.
• Auto tuning may not be possible in areas where the received signal is weak.
210 Audio and Visual
Selecting from a preset button
1
Touch a preset button saved in the memory.
• The saved preset channel is selected and the corresponding
station is received.
■
Selecting a radio band
In FM radio mode only, you can select the reception band.
1
Press .
2
Touch (FM).
FM
• Touch (FM) to change the reception band in the
FM
following order.
FM1 FM2 FM3
• The band currently being received is displayed at the top left of
the screen.