Download Print this page
Subaru FORESTER 2012 Service Manual
Subaru FORESTER 2012 Service Manual

Subaru FORESTER 2012 Service Manual

Hide thumbs Also See for FORESTER 2012:

Advertisement

2001 FORESTER SERVICE MANUAL
ENGINE2 SECTION
This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair of
SUBARU vehicles.
This manual includes the procedures for
maintenance, disassembling, reassem-
bling, inspection and adjustment of com-
ponents and diagnostics for guidance of
experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping their
vehicle in optimum condition. When
replacement of parts during repair work is
needed, be sure to use SUBARU genu-
ine parts.
All information, illustration and specifica-
tions contained in this manual are based
on the latest product information avail-
able at the time of publication approval.
FUJI HEAVY INDUSTRIES LTD.
QUICK REFERENCE INDEX
G8050GE3

Advertisement

loading

Summary of Contents for Subaru FORESTER 2012

  • Page 1 When replacement of parts during repair work is needed, be sure to use SUBARU genu- ine parts. All information, illustration and specifica- tions contained in this manual are based on the latest product information avail- able at the time of publication approval.
  • Page 2: Table Of Contents

    EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) EC(SOHCw/oOBD) Page General Description..................2 Front Catalytic Converter ................3 Canister .......................6 Purge Control Solenoid Valve ..............7 Two-way Valve ....................8...
  • Page 3: General Description

    GENERAL DESCRIPTION Emission Control (Aux. Emission Control Devices) 1. General Description S160001 A: CAUTION S160001A03 ¼ Wear working clothing, including a cap, protec- tive goggles, and protective shoes during opera- tion. ¼ Remove contamination including dirt and corro- sion before removal, installation or disassembly. ¼...
  • Page 4: Front Catalytic Converter

    FRONT CATALYTIC CONVERTER Emission Control (Aux. Emission Control Devices) 2. Front Catalytic Converter 7) Remove bolts which hold front exhaust pipe S160017 onto cylinder heads. A: REMOVAL S160017A18 1) Set the vehicle on the lift. 2) Disconnect battery ground cable. B2M3200 8) Remove front exhaust pipe and center exhaust pipe from hanger bracket.
  • Page 5 FRONT CATALYTIC CONVERTER Emission Control (Aux. Emission Control Devices) 4) Install center exhaust pipe to rear exhaust pipe. B: INSTALLATION S160017A11 Tightening torque: CAUTION: 18 N·m (1.8 kgf-m, 13.0 ft-lb) Replace gaskets with new ones. 1) Install front catalytic converter to front exhaust pipe.
  • Page 6 FRONT CATALYTIC CONVERTER Emission Control (Aux. Emission Control Devices) 9) Connect battery ground cable. G6M0095 C: INSPECTION S160017A10 1) Make sure there are no exhaust leaks from con- nections and welds. 2) Make sure there are no holes or rusting. EC(SOHCw/oOBD)-5...
  • Page 7: Canister

    CANISTER Emission Control (Aux. Emission Control Devices) 3. Canister S160037 A: REMOVAL S160037A18 1) Remove air intake duct as a unit. S6M0353 2) Disconnect canister hoses from evaporation pipes. 3) Remove canister with bracket. S2M0574 B: INSTALLATION S160037A11 Install in the reverse order of removal. CAUTION: Insert air vent hose of canister into the hole on body.
  • Page 8: Purge Control Solenoid Valve

    PURGE CONTROL SOLENOID VALVE Emission Control (Aux. Emission Control Devices) 4. Purge Control Solenoid B: INSTALLATION S160035A11 Valve Install in the reverse order of removal. S160035 Tightening torque: A: REMOVAL S160035A18 16 N·m (1.6 kgf-m, 11.6 ft-lb) 1) Disconnect battery ground cable. S2M1198 G6M0095 CAUTION:...
  • Page 9: Two-Way Valve

    TWO-WAY VALVE Emission Control (Aux. Emission Control Devices) 5. Two-way Valve S160707 A: REMOVAL S160707A18 Disconnect hoses from two-way valve, and remove S2M0578 B: INSTALLATION S160707A11 Install in the reverse order of removal. C: INSPECTION S160707A10 Make sure that hoses are not cracked or loose. EC(SOHCw/oOBD)-8...