Turning The Power On Or Off - Subaru Impreza 2012 Instruction Manual

Before Use

Turning the Power On or Off

This unit switches on automatically at ignition, and when started for the
first time, it displays the Navigation setting screen
switched off, the unit also switches off.
* The second and subsequent times that the unit is started, the mode
screen that was last in use is displayed. If the last mode in use was the
Navigation screen, then your current position will be displayed. If it was
the Audio operation screen, then the audio selection that was last playing
will be displayed.
■
Turning on the power
1
The Caution screen is displayed automatically. When you
touch (I Agree), the "SD Eject" Caution screen
I Agree
appears.
• I Agree (I Agree) turns down the tone during system startup.
Touch to increase the tone after system startup.
• To select a language, touch
the Languages screen. Touch the language that you want to
use from the list. For details, see "Language setting" on Page 36.
2
Touch (OK) to display the Navigation setting screen.
OK
• To stop the "SD Eject" Caution screen from being displayed
again, touch
The message won't be indicated from now onward
message won't be indicated from now onward) and then touch
OK (OK).
14 Introduction
*
. When the engine is
Languages (Languages) to display
(The
<Caution screen>
<Navigation setting screen>
NOTE
Do not press (Main Unit/Steering Wheel Switch) without pressing the
"I Agree" button on the Caution screen. Otherwise, Navigation commands
cannot be used.
<Opening screen>
<"SD Eject" Caution screen>