Nokia E70 User Manual page 90

EAP settings
Select Menu Tools Settings
> >
points. Select Options New access
>
access point and Options > Edit.
In the access point settings, select
802.1x or WLAN security mode
Select WLAN security sett. WPA mode
>
Select EAP plug-in settings and the EAP plug-ins to use
with a wireless LAN access point.
You can also select Options and view the plug-in settings
or change the priority of the plug-in.
Define the following settings:
User certificate — enter a user certificate.
•
CA certificate — enter a CA certificate.
•
User name in use — select
•
configured.
User name — enter a user name to be used for
•
authentication.
Realm in use — select From certificate
•
configured.
Realm — enter a realm name.
•
Enable or disable a CA certificate, To enable a CA
certificate, select Options > Enable. To disable a CA
certificate, select Options > Disable.
To view details about an EAP type, select
Advanced settings for wireless LAN access
points
Select Menu Tools Settings
> >
points.
90
Scroll to a packet data access point, and select
Advanced settings
Connection Access
> >
point, or select an IPv4 settings
•
addresses for the IPv4 Internet protocol.
IPv6 settings
•
WLAN security mode
>
addresses for the IPv6 Internet protocol.
> WPA/WPA2.
Ad-hoc channel
•
> EAP.
hoc, select
number (1-11).
Proxy serv. address
•
Proxy port number
•
number.
Proxy servers are intermediate servers between a
browsing service and its users, which are used by some
service providers. These servers may provide additional
security and speed up access to the service.
From certificate or User-
The settings available for editing may vary. Contact your
service provider for more information.
IPv4 settings
or User-
In IPv6
Phone IP address
•
Subnet mask
•
devices in the subnet.
Default gateway
•
that transmits data from your device to a destination
outside the subnet.
View details.
DNS address
•
DNS address
your service provider. Otherwise, the name server
addresses are provided automatically. Domain name
servers translate domain names (www.nokia.com)
Connection Access
> >
into IP addresses (192.100.124.195).
and from the following:
— Enter the device IP and name server
— Select or enter the name server
— If the selected network mode is ad-
User defined to manually enter a channel
— Enter the proxy server address.
— Enter the proxy server port
settings, define the following:
— Enter your device IP address.
— Enter the IP address common to all
— Enter the address of the router
— Enter the IP addresses of the
and Secondary DNS addr., if required by
Options
>
Primary