Define Security Settings; Change The Restriction Password - Nokia E70 User Manual

You can modify the security settings for the PIN code,
automatic lock, and SIM card change, and change codes
and passwords.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialing of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.

Define security settings

To define device and SIM card settings, select a setting and
Options > Change.
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Define the following:
PIN code request — Select
•
code is entered each time the device is switched on.
This setting cannot be changed if the phone is
switched off. Some SIM cards do not allow turning off
the PIN code request.
PIN code — Change the PIN code. The PIN code must
•
be 4 to 8 numbers long. The PIN code protects your SIM
card against unauthorized use and is provided with
the SIM card. After three consecutive incorrect PIN code
entries, the PIN code is blocked, and you need to use
the PUK code to unblock it before you can use the SIM
card again.
PIN2 code — Change the PIN2 code. The PIN2 code
•
must be 4 to 8 numbers long. The PIN2 code is required
to access some functions of the device and is provided
with the SIM card. After three consecutive incorrect
34
PIN2 code entries, the PIN2 code is blocked, and you
need to use the PUK2 code to unblock it before you can
use the SIM card again.
Autolock period
•
device is automatically locked and can be used only if
the correct lock code is entered. Enter a number for the
time-out in minutes, or select
autolock period. When the device is locked, you can
still answer incoming calls and calls may still be
possible to the official emergency number
programmed into your device.
Lock code
•
be 5 to 10 digits long. The preset code is 12345. To
avoid unauthorized use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device.
Lock if SIM changed
•
code when an unknown, new SIM card is inserted into
On to request that the PIN your device. The device maintains a list of SIM cards
that are recognized as the owner's cards.
Closed user group
•
of people to whom you can call and who can call you.
Confirm SIM services
•
device to display confirmation messages when you are
using a SIM card service.

Change the restriction password

To change the password used for restricting voice, fax,
and data calls, select
barring
barrings
code twice. The restriction password must be four digits
long. For details, contact your service provider.
— Set a time-out after which the
None to turn off the
— Change the lock code. The new code must
— Set the device to ask for the lock
(network service) — Specify a group
(network service) — Set the
Menu Tools Settings
> >
Cellular call barring. Select Options
>
passw.. Enter the current code, and then the new
Call
>
Edit
>