Table of Contents
Advertisement
﹡Enter the country code , area code (without prefix zero) and phone number.
﹡press
1.7 During a phone call
After pressing key
Contact
Messages
Mute
Start Recording
Ⅱ Menu Overview
Operator authorized UIM card can be used in the handset for accessing menu detailed below. If
UIM card not inserted user can make SOS (emergency) calls.
Note: you can also directly press 1 to 9 to select a menu in the main menu.
1. Names
Allows you to store the often-used numbers into UIM card or the mobile phone and at the same
time supply you with search, add group, store, and erase and memory capacity.
1. Press and hold the buttons of both sides of the charger after the charging to plug out the charger.
2. We suggest you to charge the battery fully when you use the phone for the first time. It takes
about 3 hours for full charging.
3. Do not pull out the plug of the charger duri-ng the charging to avoid harming of the phone and
charger.
1.5 Switch on/off
Pressing and holding
If you have set PIN code, please enter PIN when switch on your phone.
Input PIN code
You can set protection code (PIN CODE) in order to prevent random using of your phone by
others. Each time you restart your phone, the phone will ask you to input PIN code after setting.
﹡Input PIN code (supplied by network oper-ator which can be revised. In order to keep it in
security, ﹡ will be shown on the screen to replace the number you input.)
﹡Press OK, and after a short time, your mo-bile phone will confirm its correctness and begin to
register on the network. Once the network name is shown on the screen, you can dial or answer a
call. If no network name is shown on the screen, you need to register again.
Note:
●To enter the security menu Default PIN is 0000 (Four times zero).
●To Enabled / Disable PIN Default PIN is 1234.
Input wrong PIN code
If you make a wrong input, you can press rig-ht soft key to reenter numbers. Three conti-nuous
wrong inputs of PIN code will lock the UIM card. In this condition phone ask for PUK (PIN
Unlocking key) . User can get PUK from service provider customer care.
to dial
user can view following contents given below:
can switch on/off the phone.
Advertisement
Table of Contents
