Acer L05 User Manual page 33

4. In the Available device list, find the Leap Ware name in the list
("Leap Wear-xxxx" where xxxx = number).
5. Tap the Leap Ware name and make sure it is Paired.
6. The Snapshot function should now work.
My Leap Ware has turned off
Your Leap Ware will automatically turn off if the battery level drops to
about 1%, try charging it for at least 15 minutes before using it again.
Your Leap Ware will also turn off if the battery overheats. If your Leap
Ware is unusually warm, allow it to cool before charging it. If the Leap
Ware repeatedly overheats, please contact an authorized Acer
service center.
How do I wake my Leap Ware up?
If you are having trouble waking your Leap Ware up, try charging it.
If it has been fully charged or still has power, tap the screen or press
the Home key.
My Leap Ware won't turn on
Try charging your Leap Ware. It should turn on after a few minutes of
charging.
If this doesn't help, please contact an authorized Acer service center.
My Leap Ware won't pair
Please make sure your smartphone's Bluetooth is enabled from your
smartphone's Bluetooth settings. If you have just enabled Bluetooth,
remove Acer Liquid Life from recent apps and launch it again.
If Acer Liquid Life says it cannot find your Leap Ware, please go to
your smartphone's Bluetooth settings and look at the connected
devices. You should see a device name starting with LeapWare. If it
says connected, tap and hold the device name (or in iOS tap the (i)
icon) and select Forget this device or delete. Return to Acer Liquid
Life and connect again.
How do I remove the Leap Ware from my account?
Open Acer Liquid Life, open Settings and tap Device. You will see an
Unpair button; tap to unpair your Leap Ware.
To pair a new device, see
on page 9.
Pairing the Leap Ware with your phone
Troubleshooting - 33