Uv Meter - Acer L05 User Manual

14 - Using the Leap Ware

UV meter

Swipe up again to start the UV meter.
The UV meter will measure the ambient UV intensity and
displays a rating indicating UV intensity, from low to
high.
Note
Do not block the sensor (above the touchscreen) while it is active.
World Clock
Swipe up again and tap to see the World Clock.
This screen shows the time in the time zone set by the
Liquid Life app.
Note
To change the World Clock zone, in the Liquid Life app, tap the Settings icon
then the name of your Leap Ware under Device. Finally select World Clock
then an appropriate city / time zone from the list.
Flashlight / torch
Swipe up again and tap to see the flashlight / torch
controls for the LED on the right side of the Leap Ware.
• Tap SOS to blink the morse code for 'SOS'.
• Tap the middle icon to turn the LED on.
• Tap the right-side icon to flash the LED repeatedly.
Tap the icon again to turn off the LED.
Note
As the LED is on the right-side of the Leap Ware, please wear the device on
your left wrist, or remove the device temporarily.
UV Estimating...
21:45
Paris