Setting Up - Acer L05 User Manual

Unpacking your Leap Ware
Your new Leap Ware comes packed in a protective box. Carefully
unpack the contents of the box. If any of the following items are
missing or damaged, contact your dealer immediately:
• Your new Acer Leap Ware device
• Charging cable
• Quick Guide
Charging the battery
For first use, you need to charge your Leap Ware for approximately
150 minutes. After the first full charge, you can charge it as necessary.
1. Attach the USB cable to the Leap Ware, lining up the charging
connectors. Ensure the cable is orientated correctly and clicks into
place; the cable is held in place with a pair of magnets.
Note
The Leap Ware will turn on automatically after charging for 15 seconds.
For first use, the Leap Ware must charge before it will turn on.
2. Connect the cable to a USB port on your computer or a certified
USB charger (typically 5 V, 1 to 2 A - not included).
Note
Use only a charger that complies with national safety standards. Using
other chargers may damage the device and risks injury and property
damage.
S
E T T IN G U P

Setting up - 5