Site Survey - Panasonic KX-UDS124 Installation Manual

4 Deployment Procedure

4.3 Site Survey

Confirming SIP-CS Coverage Area for Air Synchronisation between SIP-CSs
Confirm the radio signal strength of the SIP-CS at each planned location. The SIP-CS's LED indicates the
strength of the wireless connection.
: Planned Location
LED:
Orange flashing
AC
adaptor
Site Survey
Slave Mode
Confirming SIP-CS Coverage Area for Establishing Conversations
After confirming the SIP-CS coverage area for air synchronisation, confirm the speech quality. The speech
quality will be shown on the S-PS's LCD.
: Confirmed Location
Site Survey for Air Synchronisation
After completing site planning, you can use 2 SIP-CSs to conduct the site survey to check radio signal strength.
Then, if necessary, modify the location of the SIP-CSs accordingly. You can check the radio signal strength
by the colour of the SIP-CS's LED.
Confirming the Coverage Area for Air Synchronisation between SIP-CSs
1.
Supply power to the 2 SIP-CSs using AC adaptors.
2.
Turn on SIP-CS(1) by holding the RESET switch.
34 Installation Guide
Site Survey
Master Mode
AC
adaptor
LED:
Green flashing
AC
Adaptor
LED:
Red and green alternate flashing
LED:
Red and green alternate flashing
AC
adaptor